Ecotek 100
Technical Info

 

Home
CB-26P
Power Boost
Ecotek 100

 

 

 

 


 

 

If you demand the highest standards from you car you need to be sure that you give it the best protection in return.
Ecotek 100 is Mercedes 229.3 certified for 18,000 miles (30,000 kms) - the highest engine oil OEM category.
Even the best oils eventually deteriorate, they are difficult to get hold of and tend to be expensive. 
To be sure of ultimate protection you need to be able to answer yes to all these questions?:

If the answer to any of these questions is 'no' then you need to add Ecotek 100 to your oil.

 

bullet

Are you sure that the best oil was used last time the oil was changed?

bullet

Are you sure that the oil is fully synthetic and will match the performance of your engine?

bullet

Are you sure that it will last till the next change?

bullet

Are you sure it contains the full balance of dispersants, detergents, anti-oxidants and anti-wear chemicals?

bullet

Are you sure that these chemicals are of the highest quality and have been tested to last at least 18,000 miles?

bullet

Is the viscosity modifier of your oil at least SAE 5W- 40?

bullet

Is your oil free of solid additives such as PTFE's? Can you easily get the same quality oil if you need a top-up?

bullet

Are you completely confident your oil will fully protect your engine under maximum stress?

bullet

Is you oil designed to last for at least 30,000 kms?

 

 


Fast Ford

"Ecotek 100 is a synthetic oil additive that contains anti wear, anti oxidant, detergent and dispersant chemicals to work with standard engine oils to provide the best Protection."


Auto Express

"Aims to give your engine ultimate protection... the anti oxidants, detergents, dispersants and thickness modifiers in the Ecotek 100 help keep the lubricant clean and reduce engine wear."

Total MG

"Ecotek 100 can be used to re-vitalise engine that has covered a few miles to ensure that it's still giving optimum performance."

Max Power

"An oil additive designed to boost lubrication and extend oil life - this is especially useful with every moving part working overtime, any further friction reduction is a massive bonus."

 

 

 

High Quality Engine Oil is a complex and balanced mix of chemicals. It must contain not only anti wear chemical formulations but anti oxidants, dispersants, detergents and viscosity modifiers to provide complete high performance protection under all operating conditions.

Even the best balanced engine oils will deteriorate with use, the long chain polymers and other chemicals begin to break down and, as the oil gets dirty, the dispersants and detergents become less effective. Most particularly the viscosity modifiers that make sure the oil stays effective at all operating temperatures don’t last forever.

That’s why you have to change even the very best motor oil regularly. If you don’t use the manufacturers recommended oil in the first place – particularly if they specify synthetic, then you probably don’t get complete protection anyway.

You can easily upset the balance of a good motor oil if you add something new that does not contain a complete balance of active ingredients. Thus, you can make a good oil worse by using an additive that is incomplete, and you certainly wont improve a poor quality new or used motor oil, unless you add a properly balanced blend of active ingredients.


Accordingly, some oil additives can be detrimental to the overall protection provided under all operating conditions – except Ecotek 100.

Ecotek 100 contains ALL the active ingredients required in the HIGHEST grade synthetic long life performance engine oil available today.

The contents of the Ecotek 100 1ltr. bottle provides ALL the anti-wear, anti-oxidant, detergent, dispersant and viscosity modifiers designed to fulfil or exceed the testing requirements of ACEA standards:
ACEA A3, ACEA B3, ACEA B4 and API SL, API CF as well as OEM standards for Mercedes Benz 229.1 and 229.3, Volkswagen 50200/50500 and BMW Longlife 98 among others (see Technical Information), when added to 4kg of non active base oil to dilute the chemicals.


These are generally accepted as being the most demanding high performance standards for modern synthetic engine oil. Click here for more technical info, instructions, suitability etc.....

And remember these tests ensure the oil lasts long enough - many perform ok but deteriorate too soon, be sure yours lasts for a minimum of 30,000 kms (18,000 miles) - Ecotek 100 does!

 

Click here for purchase details.

 

 

Back Home Up