Synthetic

The highest levels of sustained protection are now only available from synthetic motor oils. Ecotek 100 is 100% synthetic molecular engineering of the highest specification.

 Active

The contents of Ecotek 100 represent ALL the active chemistry required by any auto engine oil. The entire contents are undiluted active ingredients in perfect balance - pure protection - for at least 18,000 miles!

 

Compatible

Suitable for any engine including turbo/super charged – petrol or diesel and can be added to ANY new or used engine oil, synthetic or mineral. Recommended both as part of an oil change and to restore old oil.

 

Complete

Contains the complete undiluted and concentrated balance of anti-wear, anti-oxidant, detergent, dispersant and viscosity modifiers required in the highest performance engine oil. 1 litre treats at least 4 kgs ordinary motor oil – sufficient for all cars – see instructions.
 

Protection

Every molecule in Ecotek 100 is designed to protect your engine, under the most demanding conditions, for longer – if you demand the best from high performance engine oil, demand Ecotek 100.

Ecotek 100 is entirely comprised of  a high performance additive system for non active base oil formulations; plus added viscosity modifiers ensuring full protection across a broad temperature range. Ecotek 100 provides sufficient of these chemicals to treat a minimum of 4kgs bulk oil (the average auto engine capacity) and tested to last for a minimum of 30,000 kms (18,000+ miles).

100% Specification 

The Technology utilised in Ecotek 100, when blended into a range of fully formulated engine oils, has performed as follows:

API tests (American Petroleum Institute) SL/CF Engine test summary; Pass: Sequence IIIF; Sequence IV-A; Sequence VG; Sequence VIII; Cat 1M-PC

ACEA tests (Association des Constructeurs Européens d' Automobiles- European Automobile Manufacturers Association): Pass: TU5-JP; TU3-MS; XUD11-BTE; M111SL; OM602A; VWICTD; VW TDI and Sequence VG.

These include OEM tests: Mercedes Benz 229.1 and 229.3; Volkswagen 50200/50500; Peugeot TU5 High Temperature; Volkswagen Turbo Diesel and Intercooled; BMW Longlife 98; Mercedes Benz M111E Fuel Economy.

These tests represent the latest and most exacting tests for any high performance oil.

Please note the additives in Ecotek 100 are designed to last for 30,000 kms in a fully formulated oil, though no responsibility can be taken for the quality of any oil to which Ecotek 100 is added.

Below is an outline of the tests and relevant effects overcome by the active chemistry in Ecotek 100 - click on the image to enlarge it.

Instructions: 

ADD TO YOUR EXISTING ENGINE OIL

When adding to new, good quality engine oil; add 100 ml of Ecotek 100 per Litre of ordinary oil (10%). CONSULT YOUR OWNERS MANUAL for total engine oil capacity (include sump + filter capacity) - normal 4 cyl car engines have a total engine oil capacity of approx 3.5 to 4.5 Litres, Diesels 5 to 6 Litres and larger 6cyl,V6/V8 engines 5 to 7 Litres.

Accordingly, for an average car engine 400 ml should be added to good quality new oil (where total engine oil capacity is approx 4 litres) - a further 100 ml of Ecotek 100 per Litre capacity should then be added after 10,000 miles.  

If the engine oil is of dubious quality or has done more than 10,000 miles add up to 200 ml of Ecotek 100 per Litre total capacity - being sure not to overfill. (Each bottle of Ecotek 100 has a measuring gauge along its spine).

Ecotek 100 is an undiluted chemical concentrate which will dissolve in your existing oil. Initially it is highly viscous and should be heated, whilst still in its sealed container, in hot water prior to application and should, if possible, be added to a warm engine. When diluted in the appropriate base oil the viscometrix of the viscosity modifier in Ecotek 100 is designed to maintain a SAE 5W/40 motor oil.

DO NOT OVERFILL your engine. When using to top up existing oil make sure there is sufficient capacity (for up to 1 Litre normally the dipstick should read ‘fill’ for this to be OK).

Add between 100ml and 200ml per Litre total capacity depending on the quality and condition of the existing engine oil - See instruction leaflet for full details. 

Ecotek 100 can be added to any engine oil: old or new, synthetic or mineral and will help re-engineer it to the highest levels of protection for ultimate performance motoring.

Usage:

Ecotek 100 can be used as an additive for all engine oils – here are some examples:

Suitability:

Ecotek 100 is suitable for use as a long life additive in any engine oil and is particularly appropriate for high performance, sustained high stress environments where the engine requires continuous and complete protection such as:

Click here for purchase details.